There are 2 types of installations: wall mount or pole mount. Install an outdoor panel antenna onto the wall for your reference:
Step 1: Unscrew antenna from L-mounting bracket on antenna base with a wrench.
Step 2: Mount vertical plate of the L-bracket on the wall with supplied screws.
Step 3: Screw antenna back onto the horizontal plate.
Notes: Wrap waterproof tape around the connectors between outdoor antenna and feeder line to avoid water or other types of damage.
According to your application requirements, please select Indoor panel antenna or Omni-ceiling antenna as an indoor antenna for coverage indoors. An example of how to install an indoor panel antenna has been provided below.
Step 1: Select a place on a wall projecting towards an area where you want reception. Normally, to provide overall coverage, you will need to choose a corner.
Step 2: Mount the bracket on the wall after drilling the screw to the wall.
Step 3: Put the panel antenna on the bracket.
Step 1: Select an indoor location near a power outlet on a wall.
Step 2: Mount the booster with the screws included as shown in your user guide or installation manual.
Step 3: Connect outdoor antenna cables to booster connector marked “outdoor”. Tighten the connection with hand or wrench if necessary.
Step 4: Connect indoor antenna cables to booster connector marked “indoor”. Tighten the connection with hand or wrench.
Step 5: Connect the AC power cord to the signal booster, and then connect the plug to the electrical outlet to power on the booster or repeater.